www.my10sen.com

I always wanted faster download for my bittorrent files, but its hard to get through when your network is heavily congested and it comes to worse when you are lacking of seeders. But not to worry, the tweak is here lol I’ve did some digging for you and here is how to actually speed up your bitcomet downloads. This tweak requires you to use the latest version of bitcomet available in planet, go and grab it here. You need to tweak a few setting to increase your download to maximum and to make your BitComet client connect to trackers properly and other seeders faster so you’ll download at your max bandwidth.



First run your bitcomet client, press CTR-P that should bring up your bitcomet preference menu. In the Maximum connections per task row, the default is auto, you’ll want to change that to 20-600. Reason I say 20-600 is because depending on your internet, the lower you set it, the slower it will download but your internet won’t time out (crash) easily. The higher you set the number, the faster you’ll download but your internet might time out easily after a couple hours and you’ll have to wait maybe 2 minutes or reset your router/modem and it will go back up.

For 768Kbp/s I suggest 20-100
For 1.5Mbp/s I suggest 100-250
For 3.0Mbp/s I suggest 250-500
3.0Mbp/s+ I suggest a full 600 or higher.

In the Connection tab, you’ll usually want unlimited download unless you want to save some of your bandwidth for gaming or surfing. For the upload, it mostly depends on how fast your internet is, if you have alot of KB/s upload speed, you’ll want to set it slightly higher since most trackers will let you download more if you upload what you download. Having the upload under 10 is not recommended, trackers will see that your not uploading much and you won’t be able to download as fast as you should.

For the final change, in the Connections to keep per task row which should be on auto as well, you should be set to around 50-Max connections per task. This change doesn’t exactly time out your internet if its set too high, but it will use up more RAM if set high. For low RAM PCs you should set to maybe 50-100 and for PCs with 1GB RAM or more then you should set it to the same as your Maximum connections per task setting so when you connect BitComet, it will have the IPs all set up and waiting.

Well that’s should do it, You should some see changes in your downloads, but be sure to let bitcomet open as long as possible and seed for others too. Dont be a bad leecher!